1 MCOMBINE Combine images to create new images. SYNOPSIS $ mcombine [ options ... ] input_file1 input_file2 output_file 2 DESCRIPTION Mcombine combine images to create new images. 2 EXAMPLES To combine a image of a cockatoo with a perch, use $ mcombine cockatoo.miff perch.ras composite.miff To compute the difference between images in a series, use $ mcombine -compose difference series.1 series.2 difference.miff To combine a image of a cockatoo with a perch starting at location (100,150), use $ mcombine -geometry +100+150 cockatoo.miff perch.ras composite.miff 2 OPTIONS -blend value blend the two images a given percent. -colors value preferred number of colors in the image. The actual number of colors in the image may be less than your request, but never more. Note, this is a color reduction option. Images with less unique colors than specified with this option will remain unchanged. Refer to quantize(9) for more details. Note, options -dither, -colorspace, and -treedepth affect the color reduction algorithm. -colorspace value the type of colorspace: GRAY, OHTA, RGB, XYZ, YCbCr, YIQ, YPbPr, or YUV. Color reduction, by default, takes place in the RGB color space. Empirical evidence suggests that distances in color spaces such as YUV or YIQ correspond to perceptual color differences more closely than do distances in RGB space. These color spaces may give better results when color reducing an image. Refer to quantize(9) for more details. The -colors or -monochrome option is required for this option to take effect. -comment string annotate an image with a comment. By default, each image is commented with its file name. Use this option to assign a specific comment to the image. Optionally you can include the image filename, type, width, height, or scene number by embedding special format characters. Embed %f for filename, %m for magick, %w for width, %h for height, %s for scene number, or \n for newline. For example, -comment "%m:%f %wx%h produces an image comment of MIFF:bird.miff 512x480 for an image titled bird.miff and whose width is 512 and height is 480. If the first character of string is @, the image comment is read from a file titled by the remaining characters in the string. -compose operator the type of image composition. By default, each of the composite image pixels are replaced by the cooresponding image tile pixel. You can choose an alternate composite operation: over in out atop xor plus minus add subtract difference replace How each operator behaves is described below. P is the image read as input_file1 and Q is image input_file2. over The result will be the union of the two image shapes, with P obscuring Q in the region of overlap. in The result is simply P cut by the shape of Q. None of the image data of Q will be in the result. out The resulting image is P with the shape of Q cut out. atop The result is the same shape as image Q, with P obscuring Q where the image shapes overlap. Note this differs from over because the portion of P outside Q's shape does not appear in the result. xor The result is the image data from both P and Q that is outside the overlap region. The overlap region will be blank. plus The result is just the sum of the image data. Output values are cropped to 255 (no overflow). This operation is independent of the matte channels. minus The result of P - Q, with underflow cropped to zero. The matte channel is ignored (set to 255, full coverage). add The result of P + Q, with overflow wrapping around (mod 256). subtract The result of P - Q, with underflow wrapping around (mod 256). The add and subtract operators can be used to perform reversible transformations. difference The result of abs(P - Q). This is useful for comparing two very similar images. replace The resulting image is Q replaced with P. Here the matte information is ignored. The image compositor requires an matte, or alpha channel in the image for some operations. This extra channel usually defines a mask which represents a sort of a cookie-cutter for the image. This is the case when matte is 255 (full coverage) for pixels inside the shape, zero outside, and between zero and 255 on the boundary. If image does not have an matte channel, it is initialized with 0 for any pixel matching in color to pixel location (0,0), otherwise 255 (to work properly borderwidth must be 0). -compress type the type of image compression: QEncoded or RunlengthEncoded. Specify +compress to store the binary image in an uncompressed format. The default is the compression type of the specified image file. -density x vertical and horizontal density of the image. This option specifies an image density for a Postscript page. The default is 72 dots per inch in the horizontal and vertical direction. Use this option to alter the default density. -display host:display[.screen] specifies the X server to contact; see X(1). -dither apply Floyd/Steinberg error diffusion to the image. The basic strategy of dithering is to trade intensity resolution for spatial resolution by averaging the intensities of several neighboring pixels. Images which suffer from severe contouring when reducing colors can be improved with this option. The -colors option is required for dithering to take effect. -font name This option specifies the font to be used for displaying normal text. The default is fixed. -geometry {%}x{%}{+-}{+-}{!} the width and height of the image. By default, the width and height are maximum values. That is, the image is expanded or contracted to fit the width and height value while maintaining the aspect ratio of the image. Append an exclamation point to the geometry to force the image size to exactly the size you specify. For example, if you specify 640x480! the image width is set to 640 pixels and height to 480. If only one factor is specified, both the width and height assume the value. To specify a percentage width or height instead, append %. The image size is multiplied by the width and height percentages to obtain the final image dimensions. To increase the size of an image, use a value greater than 100 (e.g. 125%). To decrease an image's size, use a percentage less than 100. By default the images are combined relative to the top left corner, location (0,0). Use and to specify a particular location to combine the images. -interlace type the type of interlacing scheme: NONE, LINE, or PLANE. This option is used to specify the type of interlacing scheme for raw image formats such as RGB or YUV. NONE means do not interlace (RGBRGBRGBRGBRGBRGB...), LINE uses scanline interlacing (RRR...GGG...BBB...RRR...GGG...BBB...), and PLANE uses plane interlacing (RRRRRR...GGGGGG...BBBBBB...). -label name assign a label to an image. Use this option to assign a specific label to the image. Optionally you can include the image filename, type, width, height, or scene number in the label by embedding special format characters. Embed %f for filename, %m for magick, %w for width, %h for height, or %s for scene number. For example, -label "%m:%f %wx%h" produces an image label of MIFF:bird.miff 512x480 for an image titled bird.miff and whose width is 512 and height is 480. If the first character of string is @, the image label is read from a file titled by the remaining characters in the string. When converting to Postscript, use this option to specify a header string to print above the image. -matte store matte channel if the image has one. -monochrome transform the image to black and white. -page x{+-}{+-}" preferred size and location of the Postscript page. Use this option to specify the dimensions of the Postscript page in picas or a TEXT page in pixels. The default for a Postscript page is to center the image on a letter page 612 by 792 dots per inch. The left and right margins are 18 picas and the top and bottom 94 picas (i.e. 612x792+36+36). Other common sizes are: 540x720 Note 612x1008 Legal 842x1190 A3 595x842 A4 421x595 A5 297x421 A6 709x1002 B4 612x936 U.S. Foolscap 612x936 European Foolscap 396x612 Half Letter 792x1224 11x17 1224x792 Ledger The page geometry is relative to the vertical and horizontal density of the Postscript page. See -density for details. The default page dimensions for a TEXT image is 612x792+36+36. -quality value JPEG quality setting. Quality is 0 (worst) to 100 (best). The default is 85. -scene value image scene number. -size {%}x{%}{+colors}{!} width and height of the image. Use this option to specify the width and height of raw images whose dimensions are unknown such as GRAY, RGB, or CMYK. In addition to width and height, use -size to tell the number of colors in a MAP image file, (e.g. -size 640x512+256). -stere" combine two images into a red-green stereo image. The left side of the stereo pair is saved as the red channel of the output image. The right sife is saved as the green channel. Red-blue stereo glasses are required to properly view the stereo image. -treedepth value Normally, this integer value is zero or one. A zero or one tells combine to choose a optimal tree depth for the color reduction algorithm. An optimal depth generally allows the best representation of the source image with the fastest computational speed and the least amount of memory. However, the default depth is inappropriate for some images. To assure the best representation, try values between 2 and 8 for this parameter. Refer to quantize(9) for more details. The -colors option is required for this option to take effect. -verbose print detailed information about the image. This information is printed: image scene number; image name; combined image name; image size; the image class (DirectClass or PseudoClass); the total number of unique colors; and the number of seconds to read and combine the image. Options are processed in command line order. Any option you specify on the command line remains in effect until it is explicitly changed by specifying the option again with a different effect. Change '-' to '+' in any option above to reverse its effect. For example, specify +matte to store the image without its matte channel. By default, the image format is determined by its magic number. To specify a particular image format, precede the filename with an image format name and a colon (i.e. ps:image) or specify the image type as the filename suffix (i.e. image.ps). See convert(1) for a list of valid image formats. When you specify X as your image type, the filename has special meaning. It specifies an X window by id, name, or root. If no filename is specified, the window is selected by clicking the mouse in the desired window. Specify input_file as - for standard input, output_file as - for standard output. If input_file has the extension .Z or .gz, the file is uncompressed with uncompress or gunzip respectively. If output_file has the extension .Z or .gz, the file size is compressed using with compress or gzip respectively. Finally, precede the image file name with | to pipe to or from a system command. Use an optional index enclosed in brackets after a file name to specify a desired subimage of a multi-resolution image format like Photo CD (e.g. img0001.pcd[4]). If output_file already exists, you will be prompted as to whether it should be overwritten. 2 ENVIRONMENT display To get the default host, display number, and screen. 2 COPYRIGHT Copyright 1994 E. I. du Pont de Nemours and Company Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of E. I. du Pont de Nemours and Company not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. E. I. du Pont de Nemours and Company makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty. E. I. du Pont de Nemours and Company disclaims all warranties with regard to this software, including all implied warranties of merchantability and fitness, in no event shall E. I. du Pont de Nemours and Company be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortuous action, arising out of or in connection with the use or performance of this software. 2 AUTHORS John Cristy, E.I. du Pont De Nemours and Company Incorporated