!++ ! FACILITY: ! KERMIT-32/36 ! ! ABSTRACT: ! This file contains the common definitions for KERMIT-32 and KERMIT-36. ! ! ENVIRONMENT: ! User mode ! ! AUTHOR: Robert C. McQueen, CREATION DATE: 24-January-1983 ! ! MODIFIED BY: ! ! 13-June-83 Nick Bush ! Change maximum record length for RMS records to be 4096 instead ! of 256. ! ! 3-Jan-1984 Nick Bush ! Add FNM_xxx symbols for type of file specification to send. ! ! 6-July-1984 Nick Bush ! Increase MAX_MSG so that it includes space for the start-of-packet ! and end-of-line characters, plus a little slop, just in case. ! ! 3.2.074 By: Robert McQueen On: 11-March-1986 ! Put MAX_MSG back the way it was. ! !-- %SBTTL 'Table of Contents' %SBTTL 'Symbol definitions -- Routine calls' ! ! EQUATED SYMBOLS: ! ! ! Function types passed to FILE_OPEN routine. ! LITERAL FNC_READ = 0, ! Open for reading FNC_WRITE = 1; ! Open for writing ! ! File types used ! LITERAL FILE_ASC = 1, ! ASCII files (SEVEN-BIT) FILE_BIN = 2, ! Binary (.COM) files. (EIGHT-BIT) FILE_BLK = 3, ! Block transfer of files FILE_FIX = 4; ! Fixed 512 byte records under Files-11 ! (used for PRO/KERMIT .TSK files) ! ! File naming forms ! ! Note: Only FNM_NORMAL should be a true value (have LSB on). Other ! values must be false, or the name will be normalized. ! GLOBAL LITERAL FNM_NORMAL = 1, ! Normal form file names FNM_FULL = 2, ! Complete file names FNM_UNTRAN = 4; ! Untranslated (but not full) names ! ! Parity types ! GLOBAL LITERAL PR_MIN = 0, ! Min offset PR_NONE = 0, ! No parity PR_MARK = 1, ! Mark parity PR_EVEN = 2, ! Even parity PR_ODD = 3, ! Odd parity PR_SPACE = 4, ! Space PR_MAX = 4; ! Max offset ! ! DO_GENERIC commands ! ! Generic commands that we can send ! GLOBAL LITERAL GC_MIN = 1, ! Min command GC_EXIT = 1, ! EXIT command GC_DIRECTORY = 2, ! List DIRECTORY command GC_DISK_USAGE = 3, ! Display disk usage summary GC_DELETE = 4, ! DELETE file command GC_TYPE = 5, ! TYPE file command GC_HELP = 6, ! Display HELP information GC_LOGOUT = 7, ! LOGOUT command GC_LGN = 8, ! LOGIN command GC_CONNECT = 9, ! CONNECT (CWD) command GC_RENAME =10, ! RENAME file command GC_COPY =11, ! COPY file command GC_WHO =12, ! WHO is logged in (Finger) GC_SEND_MSG =13, ! Send a message GC_STATUS =14, ! Get status of server GC_COMMAND =15, ! Perform host command GC_KERMIT =16, ! Perform Kermit command GC_JOURNAL =17, ! Perform journal functions GC_VARIABLE =18, ! Set/get variable value GC_PROGRAM =19, ! Run program and pass command GC_MAX =19; ! Max command !++ !The following denotes the type of communications line that is being used. !-- GLOBAL LITERAL DP_FULL = 0, ! Full duplex line DP_HALF = 1; ! Half duplex line !++ ! The following are the various checksum types that are allowed. !-- GLOBAL LITERAL CHK_1CHAR = %C'1', ! One character checksums CHK_2CHAR = %C'2', ! Two character checksums CHK_CRC = %C'3'; ! Three character CRC. %SBTTL 'Character definitions' ! ! Character definitions ! LITERAL CHR_NUL = %O'000', ! Null (tape feed character, fill character) CHR_SOH = %O'001', ! Start of header CHR_STX = %O'002', ! Start of text CHR_ETX = %O'003', ! End of text CHR_EOT = %O'004', ! End of transmission CHR_ENQ = %O'005', ! Enquiry (WRU "Who are you?") CHR_ACK = %O'006', ! Acknowledge CHR_BEL = %O'007', ! Bell CHR_BS = %O'010', ! Backspace CHR_TAB = %O'011', ! Horizontal tab CHR_LFD = %O'012', ! Line feed CHR_VTB = %O'013', ! Vertical tab CHR_FFD = %O'014', ! Form feed CHR_CRT = %O'015', ! Carriage return CHR_SO = %O'016', ! Shift out CHR_SI = %O'017', ! Shift in CHR_DLE = %O'020', ! Data link escape CHR_DC1 = %O'021', ! Device control 1 (also XON) CHR_DC2 = %O'022', ! Device control 2 (also TAPE or AUX ON) CHR_DC3 = %O'023', ! Device control 3 (also XOFF) CHR_DC4 = %O'024', ! Device control 4 (also AUX OFF) CHR_NAK = %O'025', ! Negative acknowledge CHR_SYN = %O'026', ! Synchronous idle (SYNC) CHR_ETB = %O'027', ! End of transmission block CHR_CAN = %O'030', ! Cancel CHR_EM = %O'031', ! End of medium CHR_SUB = %O'032', ! Substitute CHR_ESC = %O'033', ! Escape CHR_FS = %O'034', ! File separator CHR_GS = %O'035', ! Group separator CHR_RS = %O'036', ! Record separator CHR_US = %O'037', ! Unit separator CHR_CTL_A = %O'001', ! Control-A CHR_CTL_B = %O'002', ! Control-B CHR_CTL_C = %O'003', ! Control-C CHR_CTL_D = %O'004', ! Control-D CHR_CTL_E = %O'005', ! Control-E CHR_CTL_F = %O'006', ! Control-F CHR_CTL_G = %O'007', ! Control-G CHR_CTL_H = %O'010', ! Control-H CHR_CTL_I = %O'011', ! Control-I CHR_CTL_J = %O'012', ! Control-J CHR_CTL_K = %O'013', ! Control-K CHR_CTL_L = %O'014', ! Control-L CHR_CTL_M = %O'015', ! Control-M CHR_CTL_N = %O'016', ! Control-N CHR_CTL_O = %O'017', ! Control-O CHR_CTL_P = %O'020', ! Control-P CHR_CTL_Q = %O'021', ! Control-Q CHR_CTL_R = %O'022', ! Control-R CHR_CTL_S = %O'023', ! Control-S CHR_CTL_T = %O'024', ! Control-T CHR_CTL_U = %O'025', ! Control-U CHR_CTL_V = %O'026', ! Control-V CHR_CTL_W = %O'027', ! Control-W CHR_CTL_X = %O'030', ! Control-X CHR_CTL_Y = %O'031', ! Control-Y CHR_CTL_Z = %O'032', ! Control-Z CHR_SP = %C' ', ! Space CHR_DEL = %O'177', ! Delete CHR_ESCAPE = %O'035', ! Connect escape character CHR_SIZE = 8; ! Size of the characters we process ! ! Constants ! LITERAL TRUE = (0 EQL 0), ! Value of true FALSE = (0 NEQ 0), ! Value of FALSE. MAX_FILE_NAME = 132, ! Maximum length of a file specification MAX_REC_LENGTH = 4096, ! Maximum record length we handle INIT_DELAY = 5; ! Initial delay time GLOBAL LITERAL MAX_MSG = 96; ! Maximum message length