Article 10220 of comp.protocols.tcp-ip:
Path: arizona!noao-gemini!asuvax!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!CISCO.COM!satz
From: satz@CISCO.COM (Greg Satz)
Newsgroups: comp.protocols.tcp-ip
Subject: Re: Mac FTP
Message-ID: <9002020956.AA12044@ucbvax.Berkeley.EDU>
Date: 2 Feb 90 08:32:08 GMT
References: <767@bnrgate.bnr.ca>
Sender: usenet@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 24

A version of NCSA Telnet 2.3 for the Macintosh with SLIP and MacTCP is
available for anonymous ftp from ftp.cisco.com as telnet.hqx. This version
is a combined NCSA TCP/IP and MacTCP driver version. You configure SLIP on
the modem port with the hardware=slipN configuration command (N is the baud
rate, e.g. 9600). MacTCP can be used by specifying hardware=driver. This
version will also try to do BOOTP to determine its IP address if dynamic
address configuration is requested and you are using NCSA TCP/IP. This is
useful for cisco (to name one) Terminal Servers which will respond to BOOTP
requests on their SLIP lines. The BYU FTP client is also supported by
selecting service FTP in the open connection dialog.

This version is copyright cisco Systems, Inc. It can be used and given away
as long as it is not sold. Only the binary will be made available. This
software is being supplied as is without any warranty or support.  I will
gladly receive bug reports but I can make no commitment to fixing them.

I also cannot mail anyone copies of this file. If you cannot FTP it, you
will need to ask someone else who can.

Greg Satz
cisco

PS. I am looking for a REGIS terminal emulator that I could possibly
incorporate into this package.