This is Info file ../info/emacs, produced by Makeinfo-1.55 from the input file emacs.texi.  File: emacs, Node: Change Window, Prev: Pop Up Window, Up: Windows Deleting and Rearranging Windows ================================ `C-x 0' Get rid of the selected window (`delete-window'). That is a zero. `C-x 1' Get rid of all windows except the selected one (`delete-other-windows'). `C-x ^' Make selected window taller (`enlarge-window'). `C-x }' Make selected window wider (`enlarge-window-horizontally'). To delete a window, type `C-x 0' (`delete-window'). (That is a zero.) The space occupied by the deleted window is given to an adjacent window (but not the minibuffer window, even if that is active at the time). Once a window is deleted, its attributes are forgotten; only restoring a window configuration can bring it back. Deleting the window has no effect on the buffer it used to display; the buffer continues to exist, and you can select it in any window with `C-x b'. `C-x 1' (`delete-other-windows') is more powerful than `C-x 0'; it deletes all the windows except the selected one (and the minibuffer); the selected window expands to use the whole frame except for the echo area. To readjust the division of space among vertically adjacent windows, use `C-x ^' (`enlarge-window'). It makes the currently selected window get one line bigger, or as many lines as is specified with a numeric argument. With a negative argument, it makes the selected window smaller. `C-x }' (`enlarge-window-horizontally') makes the selected window wider by the specified number of columns. The extra screen space given to a window comes from one of its neighbors, if that is possible. If this makes any window too small, it is deleted and its space is given to an adjacent window. The minimum size is specified by the variables `window-min-height' and `window-min-width'.  File: emacs, Node: Frames, Next: Major Modes, Prev: Windows, Up: Top Frames and X Windows ******************** When using the X Window System, you can create multiple windows at the X level in a single Emacs session. Each X window that belongs to Emacs displays a "frame" which can contain one or several Emacs windows. A frame initially contains a single general-purpose Emacs window which you can subdivide vertically or horizontally into smaller windows. A frame normally contains its own echo area and minibuffer, but you can make frames that don't have these--they use the echo area and minibuffer of another frame. Anything you do in one frame also affects the other frames. For instance, if you put text in the kill ring in one frame, you can yank it in another frame. If you exit emacs through `C-x C-c' in one frame, it terminates all the frames. To delete just one frame, use `C-x 5 0'. To avoid confusion, we reserve the word "window" for the subdivisions that Emacs implements, and never use it to refer to a frame. * Menu: * Mouse Commands:: Moving, cutting, and pasting, with the mouse. * Secondary Selection::Cutting without altering point and mark. * Creating Frames:: Creating additional Emacs frames with various contents. * Frame Parameters:: Changing the colors and other modes of frames. * Scroll Bars:: How to enable and disable scroll bars; how to use them. * Menu Bars:: Enabling and disabling the menu bar. * Faces:: How to change the display style using faces. * Modifying Faces:: How to change what a particular face looks like. * Misc X:: Iconifying and deleting frames. Region highlighting.  File: emacs, Node: Mouse Commands, Next: Secondary Selection, Up: Frames Mouse Commands ============== `mouse-1' Move point to where you click (`mouse-set-point'). This is normally the left button. `drag-mouse-1' Set the region to the text you select by dragging, and copy it to the kill ring (`mouse-set-region'). Thus, you can specify both ends of the region. If you move the mouse off the top or bottom of the window while dragging, the window scrolls at a steady rate until you move the mouse back into the window. This way, you can mark regions that don't fit entirely on the screen. `mouse-2' Yank the last killed text, where you click (`mouse-yank-at-click'). This is normally the middle button. `mouse-3' This command, `mouse-save-then-kill', has several functions depending on where you click and the status of the region. If you have a highlighted region, or if the region was set just before by dragging button 1, `mouse-save-then-kill' adjusts the nearer end of the region by moving it to where you click. The adjusted region's text also replaces the old region's text in the kill ring. Otherwise, `mouse-save-then-kill' sets mark where you click, without changing point. It copies the new region to the kill ring. If you originally specified the region using a double or triple Mouse-1, so that the region is defined to consist of entire words or lines, then adjusting the region also proceeds by entire words or lines. If you use `mouse-save-then-kill' twice in a row at the same place, that kills the region already selected. `double-mouse-1' This key sets the region around the word which you click on. `double-drag-mouse-1' This key selects a region made up of the words that you drag across. `triple-mouse-1' This key sets the region around the line which you click on. `triple-drag-mouse-1' This key selects a region made up of the lines that you drag across. The simplest way to kill some text is to press Mouse-1 at one end, then press Mouse-3 twice at the other end. *Note Killing::. To copy the text into the kill ring without deleting it from the buffer, press Mouse-3 just once--or just drag across the text with Mouse-1. Then you can copy it elsewhere by yanking it. To yank the killed or copied text somewhere else, move the mouse there and press Mouse-2. *Note Yanking::. The mouse commands for selecting a region are mostly compatible with the `xterm' program. To copy text to another X window, kill it or save it in the kill ring. Under X, this also sets the "primary selection". Then use the "paste" or "yank" command of the program operating the other window to insert the text from the selection. To copy text from another X window, use the "cut" or "copy" command of the program operating the other window, to select the text you want. Then yank it in Emacs with `C-y' or Mouse-2. When Emacs puts text into the kill ring, or rotates text to the front of the kill ring, it sets the "primary selection" in the X server. This is how other X clients can access the text. Emacs also stores the text in the cut buffer, if the text is short enough (`x-cut-buffer-max' specifies the maximum number of characters); putting long strings in the cut buffer can be slow. When you yank in Emacs, Emacs checks for a primary selection in another program; after that, it checks for text in the cut buffer.  File: emacs, Node: Secondary Selection, Next: Creating Frames, Prev: Mouse Commands, Up: Frames Secondary Selection =================== The "secondary selection" is another way of selecting text using X. It does not use point or the mark, so you can use it to kill text without setting point or the mark. `drag-M-mouse-1' Set the secondary selection, with one end at the place where you press down the button, and the other end at the place where you release it (`mouse-set-secondary'). In Transient Mark mode, highlighting appears and changes as you drag. If you move the mouse off the top or bottom of the window while dragging, the window scrolls at a steady rate until you move the mouse back into the window. This way, you can mark regions that don't fit entirely on the screen. `M-mouse-1' Set one endpoint for the "secondary selection" (`mouse-start-secondary'). `M-mouse-3' Make a secondary selection, using the place specified with `M-mouse-1' as the other end (`mouse-secondary-save-then-kill'). A second click at the same place kills the secondary selection just made. `M-mouse-2' Kill the secondary selection (`mouse-kill-secondary'). Double or triple clicking of `M-Mouse-1' operates on words and lines, much like Mouse-1.  File: emacs, Node: Creating Frames, Next: Frame Parameters, Prev: Secondary Selection, Up: Frames Creating Frames =============== The prefix key `C-x 5' is analogous to `C-x 4', with parallel subcommands. The difference is that `C-x 5' commands create a new frame rather than just a new window in the selected frame. (*Note Pop Up Window::.) Different `C-x 5' commands have different ways of finding the buffer to select. `C-x 5 b BUFNAME RET' Select buffer BUFNAME in another window. This runs `switch-to-buffer-other-frame'. `C-x 5 f FILENAME RET' Visit file FILENAME and select its buffer in another frame. This runs `find-file-other-frame'. *Note Visiting::. `C-x 5 d DIRECTORY RET' Select a Dired buffer for directory DIRECTORY in another frame. This runs `dired-other-frame'. *Note Dired::. `C-x 5 m' Start composing a mail message in another frame. This runs `mail-other-frame', and its same-frame version is `C-x m'. *Note Sending Mail::. `C-x 5 .' Find a tag in the current tag table in another frame. This runs `find-tag-other-frame', the multiple-frame variant of `M-.'. *Note Tags::. `C-x 5 r FILENAME RET' Visit file FILENAME read-only, and select its buffer in another frame. This runs `find-file-read-only-other-frame'. *Note Visiting::.  File: emacs, Node: Frame Parameters, Next: Scroll Bars, Prev: Creating Frames, Up: Frames Setting Frame Parameters ======================== This section describes commands for altering the display style and window management behavior of the selected frame. `M-x set-foreground-color RET COLOR RET' Specify color COLOR for the foreground of the selected frame. `M-x set-background-color RET COLOR RET' Specify color COLOR for the background of the selected frame. `M-x set-cursor-color RET COLOR RET' Specify color COLOR for the cursor of the selected frame. `M-x set-mouse-color RET COLOR RET' Specify color COLOR for the mouse cursor when it is over the selected frame. `M-x set-border-color RET COLOR RET' Specify color COLOR for the border of the selected frame. `M-x auto-raise-mode' Toggle whether or not the selected frame should auto-raise. Auto-raise means that every time you move the mouse onto the frame, it raises the frame. `M-x auto-lower-mode' Toggle whether or not the selected frame should auto-lower. Auto-lower means that every time you move the mouse off of the frame, the frame moves to the bottom of the stack of X windows. `M-x set-default-font RET FONT RET' Specify font FONT as the default for the selected frame. *Note Font X::, for ways to list the available fonts on your system. You can also set a frame's default font through a pop-up menu. Press `C-Mouse-3' to activate this menu.  File: emacs, Node: Scroll Bars, Next: Menu Bars, Prev: Frame Parameters, Up: Frames Scroll Bars =========== When using X, Emacs normally makes a "scroll bar" at the right of each Emacs window. The scroll bar runs the height of the window, and shows a moving rectangular inner box which represents the portion of the buffer currently displayed. The entire height of the scroll bar represents the entire length of the buffer. You can use Mouse-2 (normally, the middle button) in the scroll bar to move or drag the inner box up and down. If you move it to the top of the scroll bar, you see the top of the buffer. If you move it to the bottom of the scroll bar, you see the bottom of the buffer. The left and right buttons in the scroll bar scroll by controlled increments. Mouse-1 (normally, the left button) moves the line at the level where you click up to the top of the window. Mouse-3 (normally, the right button) moves the line at the top of the window down to the level where you click. By clicking repeatedly in the same place, you can scroll by the same distance over and over. You can enable or disable Scroll Bar mode with the command `M-x scroll-bar-mode'. With no argument, it toggles the use of scroll bars. With an argument, it turns use of scroll bars on if and only if the argument is positive. This command applies to all frames, including frames yet to be created. To enable or disable scroll bars for just the selected frame, use the `M-x toggle-scroll-bar' command.  File: emacs, Node: Menu Bars, Next: Faces, Prev: Scroll Bars, Up: Frames Menu Bars ========= By default, each Emacs frame has a menu bar at the top which you can use to perform certain common operations. There's no need to describe them in detail here, as you can more easily see for yourself; also, we may change them and add to them in subsequent Emacs versions. Each of the operations in the menu bar is bound to an ordinary Emacs command which you can invoke equally well with `M-x' or with its own key bindings. To see the command's name and documentation, type `C-h k' and then select the menu bar item you are interested in. You can turn display of menu bars on or off with `M-x menu-bar-mode'. With no argument, this command toggles Menu Bar mode, a minor mode. With an argument, the command turns Menu Bar mode on if the argument is positive, off if the argument is not positive.  File: emacs, Node: Faces, Next: Modifying Faces, Prev: Menu Bars, Up: Frames Using Multiple Typefaces ======================== When using Emacs with X, you can set up multiple styles of displaying characters. The aspects of style that you can control are the type font, the foreground color, the background color, and whether to underline. The way you control display style is by defining named "faces". Each face can specify a type font, a foreground color, a background color, and an underline flag; but it does not have to specify all of them. The style of display used for a given character in the text is determined by combining several faces. Which faces to use is always set up by Lisp programs, at present, by means of text properties and overlays. Any aspect of the display style that isn't specified by overlays or text properties comes from the frame itself. To see what faces are currently defined, and what they look like, type `M-x list-faces-display'. It's possible for a given face to look different in different frames; this command shows the appearance in the frame in which you type it. When Transient Mark mode is enabled, the text of the region is highlighted when the mark is active. This uses a face named `region'; you can control the style of highlighting by changing the style of this face with the commands below. *Note Setting Mark::, for more information about Transient Mark mode and activation and deactivation of the mark. One easy way to use faces is to turn on Font-Lock mode. This minor mode, which is always local to a particular buffer, arranges to choose faces according to the syntax of the text you are editing. It can recognize comments and strings in any major mode; for several major modes, it can also recognize and properly highlight various other important parts of the text. To get the full benefit of Font-Lock mode, you need to choose a default font which has bold, italic, and bold-italic variants.  File: emacs, Node: Modifying Faces, Next: Misc X, Prev: Faces, Up: Frames Modifying Faces =============== Here are the commands for users to change the font of a face. `M-x set-face-font RET FACE RET FONT RET' Use font FONT in face FACE. `M-x make-face-bold RET FACE RET' Convert face FACE to use a bold version of its current font. `M-x make-face-italic RET FACE RET' Convert face FACE to use a italic version of its current font. `M-x make-face-bold-italic RET FACE RET' Convert face FACE to use a bold-italic version of its current font. `M-x make-face-unbold RET FACE RET' Convert face FACE to use a non-bold version of its current font. `M-x make-face-unitalic RET FACE RET' Convert face FACE to use a non-italic version of its current font. Here are the commands for users to set the colors and underline flag of a face: `M-x set-face-foreground RET FACE RET COLOR RET' Use color COLOR for the foreground of characters in face FACE. `M-x set-face-background RET FACE RET COLOR RET' Use color COLOR for the background of characters in face FACE. `M-x set-face-underline-p RET FACE RET FLAG RET' Specify whether to underline characters in face FACE. `M-x invert-face RET FACE RET' Swap the foreground and background colors of face FACE.  File: emacs, Node: Misc X, Prev: Modifying Faces, Up: Frames Miscellaneous X Window Features =============================== The following commands do user-level mangement of frames under a window system: `C-z' To iconify the selected Emacs frame, type `C-z' (`iconify-or-deiconify-frame'). The normal meaning of `C-z', to suspend Emacs, is not useful under a window system, so it has a different binding in that case. If you type this command on an Emacs icon, it deiconifies the frame. `C-x 5 0' To delete the selected frame, type `C-x 5 0' (`delete-frame'). If there is more than one frame in this invocation of Emacs, the current frame is deleted. `M-x transient-mark-mode' Under X Windows, when Transient Mark mode is enabled, Emacs highlights the region when the mark is active. This is the main motive for using Transient Mark mode. To toggle the state of this mode, use the command `M-x transient-mark-mode'. *Note Mark::.  File: emacs, Node: Major Modes, Next: Indentation, Prev: Frames, Up: Top Major Modes *********** Emacs provides many alternative "major modes", each of which customizes Emacs for editing text of a particular sort. The major modes are mutually exclusive, and each buffer has one major mode at any time. The mode line normally shows the name of the current major mode, in parentheses (*note Mode Line::.). The least specialized major mode is called "Fundamental mode". This mode has no mode-specific redefinitions or variable settings, so that each Emacs command behaves in its most general manner, and each option is in its default state. For editing any specific type of text, such as Lisp code or English text, you should switch to the appropriate major mode, such as Lisp mode or Text mode. Selecting a major mode changes the meanings of a few keys to become more specifically adapted to the language being edited. The ones which are changed frequently are TAB, DEL, and LFD. In addition, the commands which handle comments use the mode to determine how comments are to be delimited. Many major modes redefine the syntactical properties of characters appearing in the buffer. *Note Syntax::. The major modes fall into three major groups. Lisp mode (which has several variants), C mode, Fortran mode and others are for specific programming languages. Text mode, Nroff mode, TeX mode and Outline mode are for editing English text. The remaining major modes are not intended for use on users' files; they are used in buffers created for specific purposes by Emacs, such as Dired mode for buffers made by Dired (*note Dired::.), and Mail mode for buffers made by `C-x m' (*note Sending Mail::.), and Shell mode for buffers used for communicating with an inferior shell process (*note Interactive Shell::.). Most programming language major modes specify that only blank lines separate paragraphs. This is so that the paragraph commands remain useful. (*Note Paragraphs::.) They also cause Auto Fill mode to use the definition of TAB to indent the new lines it creates. This is because most lines in a program are usually indented. (*Note Indentation::.) * Menu: * Choosing Modes:: How major modes are specified or chosen.  File: emacs, Node: Choosing Modes, Prev: Major Modes, Up: Major Modes How Major Modes are Chosen ========================== You can select a major mode explicitly for the current buffer, but most of the time Emacs determines which mode to use based on the file name or on special text in the file. Explicit selection of a new major mode is done with a `M-x' command. From the name of a major mode, add `-mode' to get the name of a command to select that mode. Thus, you can enter Lisp mode by executing `M-x lisp-mode'. When you visit a file, Emacs usually chooses the right major mode based on the file's name. For example, files whose names end in `.c' are edited in C mode. The correspondence between file names and major mode is controlled by the variable `auto-mode-alist'. Its value is a list in which each element has the form (REGEXP . MODE-FUNCTION) For example, one element normally found in the list has the form `("\\.c$" . c-mode)', and it is responsible for selecting C mode for files whose names end in `.c'. (Note that `\\' is needed in Lisp syntax to include a `\' in the string, which is needed to suppress the special meaning of `.' in regexps.) The only practical way to change this variable is with Lisp code. You can specify which major mode should be used for editing a certain file by a special sort of text in the first nonblank line of the file. The mode name should appear in this line both preceded and followed by `-*-'. Other text may appear on the line as well. For example, ;-*-Lisp-*- tells Emacs to use Lisp mode. Such an explicit specification overrides any defaulting based on the file name. Note how the semicolon is used to make Lisp treat this line as a comment. Another format of mode specification is -*-Mode: MODENAME;-*- which allows you to specify local variables as well, like this: -*- mode: MODENAME; VAR: VALUE; ... -*- *Note File Variables::, for more information about this. When you visit a file that does not specify a major mode to use, or when you create a new buffer with `C-x b', the variable `default-major-mode' specifies which major mode to use. Normally its value is the symbol `fundamental-mode', which specifies Fundamental mode. If `default-major-mode' is `nil', the major mode is taken from the previously selected buffer. If you change the major mode of a buffer, you can go back to the major mode Emacs would choose automatically: use the command `M-x normal-mode' to do this. This is the same function that `find-file' calls to choose the major mode. It also processes the file's local variables list if any.  File: emacs, Node: Indentation, Next: Text, Prev: Major Modes, Up: Top Indentation *********** This chapter describes the Emacs commands that add, remove, or adjust indentation. `TAB' Indent current line "appropriately" in a mode-dependent fashion. `LFD' Perform RET followed by TAB (`newline-and-indent'). `M-^' Merge two lines (`delete-indentation'). This would cancel out the effect of LFD. `C-M-o' Split line at point; text on the line after point becomes a new line indented to the same column that it now starts in (`split-line'). `M-m' Move (forward or back) to the first nonblank character on the current line (`back-to-indentation'). `C-M-\' Indent several lines to same column (`indent-region'). `C-x TAB' Shift block of lines rigidly right or left (`indent-rigidly'). `M-i' Indent from point to the next prespecified tab stop column (`tab-to-tab-stop'). `M-x indent-relative' Indent from point to under an indentation point in the previous line. Most programming languages have some indentation convention. For Lisp code, lines are indented according to their nesting in parentheses. The same general idea is used for C code, though many details are different. Whatever the language, to indent a line, use the TAB command. Each major mode defines this command to perform the sort of indentation appropriate for the particular language. In Lisp mode, TAB aligns the line according to its depth in parentheses. No matter where in the line you are when you type TAB, it aligns the line as a whole. In C mode, TAB implements a subtle and sophisticated indentation style that knows about many aspects of C syntax. In Text mode, TAB runs the command `tab-to-tab-stop', which indents to the next tab stop column. You can set the tab stops with `M-x edit-tab-stops'. * Menu: * Indentation Commands:: Various commands and techniques for indentation. * Tab Stops:: You can set arbitrary "tab stops" and then indent to the next tab stop when you want to. * Just Spaces:: You can request indentation using just spaces.  File: emacs, Node: Indentation Commands, Next: Tab Stops, Prev: Indentation, Up: Indentation Indentation Commands and Techniques =================================== If you just want to insert a tab character in the buffer, you can type `C-q TAB'. To move over the indentation on a line, do `M-m' (`back-to-indentation'). This command, given anywhere on a line, positions point at the first nonblank character on the line. To insert an indented line before the current line, do `C-a C-o TAB'. To make an indented line after the current line, use `C-e LFD'. `C-M-o' (`split-line') moves the text from point to the end of the line vertically down, so that the current line becomes two lines. `C-M-o' first moves point forward over any spaces and tabs. Then it inserts after point a newline and enough indentation to reach the same column point is on. Point remains before the inserted newline; in this regard, `C-M-o' resembles `C-o'. To join two lines cleanly, use the `M-^' (`delete-indentation') command. It deletes the indentation at the front of the current line, and the line boundary as well, replacing them with a single space. As a special case (useful for Lisp code) the single space is omitted if the characters to be joined are consecutive open parentheses or closing parentheses, or if the junction follows another newline. To delete just the indentation of a line, go to the beginning of the line and use `M-\' (`delete-horizontal-space'), which deletes all spaces and tabs around the cursor. If you have a fill prefix, `M-^' deletes the fill prefix if it appears after the newline that is deleted. *Note Fill Prefix::. There are also commands for changing the indentation of several lines at once. `C-M-\' (`indent-region') gives each line which begins in the region the "usual" indentation by invoking TAB at the beginning of the line. A numeric argument specifies the column to indent to, and each line is shifted left or right so that its first nonblank character appears in that column. `C-x TAB' (`indent-rigidly') moves all of the lines in the region right by its argument (left, for negative arguments). The whole group of lines moves rigidly sideways, which is how the command gets its name. `M-x indent-relative' indents at point based on the previous line (actually, the last nonempty line). It inserts whitespace at point, moving point, until it is underneath an indentation point in the previous line. An indentation point is the end of a sequence of whitespace or the end of the line. If point is farther right than any indentation point in the previous line, the whitespace before point is deleted and the first indentation point then applicable is used. If no indentation point is applicable even then, `indent-relative' runs `tab-to-tab-stop' (*note Tab Stops::.). `indent-relative' is the definition of TAB in Indented Text mode. *Note Text::.  File: emacs, Node: Tab Stops, Next: Just Spaces, Prev: Indentation Commands, Up: Indentation Tab Stops ========= For typing in tables, you can use Text mode's definition of TAB, `tab-to-tab-stop'. This command inserts indentation before point, enough to reach the next tab stop column. If you are not in Text mode, this command can be found on the key `M-i'. You can specify the tab stops used by `M-i'. They are stored in a variable called `tab-stop-list', as a list of column-numbers in increasing order. The convenient way to set the tab stops is with `M-x edit-tab-stops', which creates and selects a buffer containing a description of the tab stop settings. You can edit this buffer to specify different tab stops, and then type `C-c C-c' to make those new tab stops take effect. In the tab stop buffer, `C-c C-c' runs the function `edit-tab-stops-note-changes' rather than its usual definition `save-buffer'. `edit-tab-stops' records which buffer was current when you invoked it, and stores the tab stops back in that buffer; normally all buffers share the same tab stops and changing them in one buffer affects all, but if you happen to make `tab-stop-list' local in one buffer then `edit-tab-stops' in that buffer will edit the local settings. Here is what the text representing the tab stops looks like for ordinary tab stops every eight columns. : : : : : : 0 1 2 3 4 0123456789012345678901234567890123456789012345678 To install changes, type C-c C-c The first line contains a colon at each tab stop. The remaining lines are present just to help you see where the colons are and know what to do. Note that the tab stops that control `tab-to-tab-stop' have nothing to do with displaying tab characters in the buffer. *Note Display Vars::, for more information on that.  File: emacs, Node: Just Spaces, Prev: Tab Stops, Up: Indentation Tabs vs. Spaces =============== Emacs normally uses both tabs and spaces to indent lines. If you prefer, all indentation can be made from spaces only. To request this, set `indent-tabs-mode' to `nil'. This is a per-buffer variable; altering the variable affects only the current buffer, but there is a default value which you can change as well. *Note Locals::. There are also commands to convert tabs to spaces or vice versa, always preserving the columns of all nonblank text. `M-x tabify' scans the region for sequences of spaces, and converts sequences of at least three spaces to tabs if that can be done without changing indentation. `M-x untabify' changes all tabs in the region to appropriate numbers of spaces.  File: emacs, Node: Text, Next: Programs, Prev: Indentation, Up: Top Commands for Human Languages **************************** The term "text" has two widespread meanings in our area of the computer field. One is data that is a sequence of characters. Any file that you edit with Emacs is text, in this sense of the word. The other meaning is more restrictive: a sequence of characters in a human language for humans to read (possibly after processing by a text formatter), as opposed to a program or commands for a program. Human languages have syntactic/stylistic conventions that can be supported or used to advantage by editor commands: conventions involving words, sentences, paragraphs, and capital letters. This chapter describes Emacs commands for all of these things. There are also commands for "filling", which means rearranging the lines of a paragraph to be approximately equal in length. The commands for moving over and killing words, sentences and paragraphs, while intended primarily for editing text, are also often useful for editing programs. Emacs has several major modes for editing human language text. If the file contains text pure and simple, use Text mode, which customizes Emacs in small ways for the syntactic conventions of text. For text which contains embedded commands for text formatters, Emacs has other major modes, each for a particular text formatter. Thus, for input to TeX, you would use TeX mode; for input to nroff, Nroff mode. * Menu: * Words:: Moving over and killing words. * Sentences:: Moving over and killing sentences. * Paragraphs:: Moving over paragraphs. * Pages:: Moving over pages. * Filling:: Filling or justifying text. * Case:: Changing the case of text. * Text Mode:: The major modes for editing text files. * Outline Mode:: The major mode for editing outlines. * TeX Mode:: The major modes for editing input to the formatter TeX. * Nroff Mode:: The major mode for editing input to the formatter nroff.  File: emacs, Node: Words, Next: Sentences, Up: Text Words ===== Emacs has commands for moving over or operating on words. By convention, the keys for them are all Meta characters. `M-f' Move forward over a word (`forward-word'). `M-b' Move backward over a word (`backward-word'). `M-d' Kill up to the end of a word (`kill-word'). `M-DEL' Kill back to the beginning of a word (`backward-kill-word'). `M-@' Mark the end of the next word (`mark-word'). `M-t' Transpose two words or drag a word across other words (`transpose-words'). Notice how these keys form a series that parallels the character-based `C-f', `C-b', `C-d', `C-t' and DEL. `M-@' is related to `C-@', which is an alias for `C-SPC'. The commands `M-f' (`forward-word') and `M-b' (`backward-word') move forward and backward over words. These Meta characters are thus analogous to the corresponding control characters, `C-f' and `C-b', which move over single characters in the text. The analogy extends to numeric arguments, which serve as repeat counts. `M-f' with a negative argument moves backward, and `M-b' with a negative argument moves forward. Forward motion stops right after the last letter of the word, while backward motion stops right before the first letter. `M-d' (`kill-word') kills the word after point. To be precise, it kills everything from point to the place `M-f' would move to. Thus, if point is in the middle of a word, `M-d' kills just the part after point. If some punctuation comes between point and the next word, it is killed along with the word. (If you wish to kill only the next word but not the punctuation before it, simply do `M-f' to get the end, and kill the word backwards with `M-DEL'.) `M-d' takes arguments just like `M-f'. `M-DEL' (`backward-kill-word') kills the word before point. It kills everything from point back to where `M-b' would move to. If point is after the space in `FOO, BAR', then `FOO, ' is killed. (If you wish to kill just `FOO', do `M-b M-d' instead of `M-DEL'.) `M-t' (`transpose-words') exchanges the word before or containing point with the following word. The delimiter characters between the words do not move. For example, `FOO, BAR' transposes into `BAR, FOO' rather than `BAR FOO,'. *Note Transpose::, for more on transposition and on arguments to transposition commands. To operate on the next N words with an operation which applies between point and mark, you can either set the mark at point and then move over the words, or you can use the command `M-@' (`mark-word') which does not move point, but sets the mark where `M-f' would move to. `M-@' accepts a numeric argument that says how many words to scan for the place to put the mark. The word commands' understanding of syntax is completely controlled by the syntax table. Any character can, for example, be declared to be a word delimiter. *Note Syntax::.  File: emacs, Node: Sentences, Next: Paragraphs, Prev: Words, Up: Text Sentences ========= The Emacs commands for manipulating sentences and paragraphs are mostly on Meta keys, so as to be like the word-handling commands. `M-a' Move back to the beginning of the sentence (`backward-sentence'). `M-e' Move forward to the end of the sentence (`forward-sentence'). `M-k' Kill forward to the end of the sentence (`kill-sentence'). `C-x DEL' Kill back to the beginning of the sentence (`backward-kill-sentence'). The commands `M-a' and `M-e' (`backward-sentence' and `forward-sentence') move to the beginning and end of the current sentence, respectively. They were chosen to resemble `C-a' and `C-e', which move to the beginning and end of a line. Unlike them, `M-a' and `M-e' if repeated or given numeric arguments move over successive sentences. Emacs assumes that the typist's convention is followed, and thus considers a sentence to end wherever there is a `.', `?' or `!' followed by the end of a line or two spaces, with any number of `)', `]', `'', or `"' characters allowed in between. A sentence also begins or ends wherever a paragraph begins or ends. Neither `M-a' nor `M-e' moves past the newline or spaces beyond the sentence edge at which it is stopping. Just as `C-a' and `C-e' have a kill command, `C-k', to go with them, so `M-a' and `M-e' have a corresponding kill command `M-k' (`kill-sentence') which kills from point to the end of the sentence. With minus one as an argument it kills back to the beginning of the sentence. Larger arguments serve as a repeat count. There is a special command, `C-x DEL' (`backward-kill-sentence') for killing back to the beginning of a sentence, because this is useful when you change your mind in the middle of composing text. The variable `sentence-end' controls recognition of the end of a sentence. It is a regexp that matches the last few characters of a sentence, together with the whitespace following the sentence. Its normal value is "[.?!][]\"')]*\\($\\|\t\\| \\)[ \t\n]*" This example is explained in the section on regexps. *Note Regexps::.  File: emacs, Node: Paragraphs, Next: Pages, Prev: Sentences, Up: Text Paragraphs ========== The Emacs commands for manipulating paragraphs are also Meta keys. `M-{' Move back to previous paragraph beginning (`backward-paragraph'). `M-}' Move forward to next paragraph end (`forward-paragraph'). `M-h' Put point and mark around this or next paragraph (`mark-paragraph'). `M-{' moves to the beginning of the current or previous paragraph, while `M-}' moves to the end of the current or next paragraph. Blank lines and text formatter command lines separate paragraphs and are not part of any paragraph. Also, an indented line starts a new paragraph. In major modes for programs (as opposed to Text mode), paragraphs begin and end only at blank lines. This makes the paragraph commands continue to be useful even though there are no paragraphs per se. When there is a fill prefix, then paragraphs are delimited by all lines which don't start with the fill prefix. *Note Filling::. When you wish to operate on a paragraph, you can use the command `M-h' (`mark-paragraph') to set the region around it. This command puts point at the beginning and mark at the end of the paragraph point was in. If point is between paragraphs (in a run of blank lines, or at a boundary), the paragraph following point is surrounded by point and mark. If there are blank lines preceding the first line of the paragraph, one of these blank lines is included in the region. Thus, for example, `M-h C-w' kills the paragraph around or after point. The precise definition of a paragraph boundary is controlled by the variables `paragraph-separate' and `paragraph-start'. The value of `paragraph-start' is a regexp that should match any line that either starts or separates paragraphs. The value of `paragraph-separate' is another regexp that should match only lines that separate paragraphs without being part of any paragraph. Lines that start a new paragraph and are contained in it must match only `paragraph-start', not `paragraph-separate'. For example, normally `paragraph-start' is `"^[ \t\n\f]"' and `paragraph-separate' is `"^[ \t\f]*$"'. Normally it is desirable for page boundaries to separate paragraphs. The default values of these variables recognize the usual separator for pages.  File: emacs, Node: Pages, Next: Filling, Prev: Paragraphs, Up: Text Pages ===== Files are often thought of as divided into "pages" by the "formfeed" character (ASCII control-L, octal code 014). For example, if a file is printed on a line printer, each page of the file, in this sense, will start on a new page of paper. Emacs treats a page-separator character just like any other character. You can insert it with `C-q C-l', or delete it with DEL. Thus, you are free to paginate your file or not. However, since pages are often meaningful divisions of the file, Emacs provides commands to move over them and operate on them. `C-x [' Move point to previous page boundary (`backward-page'). `C-x ]' Move point to next page boundary (`forward-page'). `C-x C-p' Put point and mark around this page (or another page) (`mark-page'). `C-x l' Count the lines in this page (`count-lines-page'). The `C-x [' (`backward-page') command moves point to immediately after the previous page delimiter. If point is already right after a page delimiter, it skips that one and stops at the previous one. A numeric argument serves as a repeat count. The `C-x ]' (`forward-page') command moves forward past the next page delimiter. The `C-x C-p' command (`mark-page') puts point at the beginning of the current page and the mark at the end. The page delimiter at the end is included (the mark follows it). The page delimiter at the front is excluded (point follows it). This command can be followed by `C-w' to kill a page which is to be moved elsewhere. If it is inserted after a page delimiter, at a place where `C-x ]' or `C-x [' would take you, then the page will be properly delimited before and after once again. A numeric argument to `C-x C-p' is used to specify which page to go to, relative to the current one. Zero means the current page. One means the next page, and -1 means the previous one. The `C-x l' command (`count-lines-page') is good for deciding where to break a page in two. It prints in the echo area the total number of lines in the current page, and then divides it up into those preceding the current line and those following, as in Page has 96 (72+25) lines Notice that the sum is off by one; this is correct if point is not at the beginning of a line. The variable `page-delimiter' controls where pages begin. Its value is a regexp that matches the beginning of a line that separates pages. The normal value of this variable is `"^\f"', which matches a formfeed character at the beginning of a line.  File: emacs, Node: Filling, Next: Case, Prev: Pages, Up: Text Filling Text ============ With Auto Fill mode, text can be "filled" (broken up into lines that fit in a specified width) as you insert it. If you alter existing text it may no longer be properly filled; then you can use the explicit fill commands to fill the paragraph again. * Menu: * Auto Fill:: Auto Fill mode breaks long lines automatically. * Fill Commands:: Commands to refill paragraphs and center lines. * Fill Prefix:: Filling when every line is indented or in a comment, etc.  File: emacs, Node: Auto Fill, Next: Fill Commands, Up: Filling Auto Fill Mode -------------- "Auto Fill" mode is a minor mode in which lines are broken automatically when they become too wide. Breaking happens only when you type a SPC or RET. `M-x auto-fill-mode' Enable or disable Auto Fill mode. `SPC' `RET' In Auto Fill mode, break lines when appropriate. `M-x auto-fill-mode' turns Auto Fill mode on if it was off, or off if it was on. With a positive numeric argument it always turns Auto Fill mode on, and with a negative argument always turns it off. You can see when Auto Fill mode is in effect by the presence of the word `Fill' in the mode line, inside the parentheses. Auto Fill mode is a minor mode, turned on or off for each buffer individually. *Note Minor Modes::. In Auto Fill mode, lines are broken automatically at spaces when they get longer than the desired width. Line breaking and rearrangement takes place only when you type SPC or RET. If you wish to insert a space or newline without permitting line-breaking, type `C-q SPC' or `C-q LFD' (recall that a newline is really a linefeed). Also, `C-o' inserts a newline without line breaking. Auto Fill mode works well with Lisp mode, because when it makes a new line in Lisp mode it indents that line with TAB. If a line ending in a comment gets too long, the text of the comment is split into two comment lines. Optionally new comment delimiters are inserted at the end of the first line and the beginning of the second so that each line is a separate comment; the variable `comment-multi-line' controls the choice (*note Comments::.). Auto Fill mode does not refill entire paragraphs. It can break lines but cannot merge lines. So editing in the middle of a paragraph can result in a paragraph that is not correctly filled. The easiest way to make the paragraph properly filled again is usually with the explicit fill commands. *Note Fill Commands::. Many users like Auto Fill mode and want to use it in all text files. The section on init files says how to arrange this permanently for yourself. *Note Init File::.  File: emacs, Node: Fill Commands, Next: Fill Prefix, Prev: Auto Fill, Up: Filling Explicit Fill Commands ---------------------- `M-q' Fill current paragraph (`fill-paragraph'). `C-x f' Set the fill column (`set-fill-column'). `M-x fill-region' Fill each paragraph in the region (`fill-region'). `M-x fill-region-as-paragraph.' Fill the region, considering it as one paragraph. `M-s' Center a line. To refill a paragraph, use the command `M-q' (`fill-paragraph'). This operates on the paragraph that point is inside, or the one after point if point is between paragraphs. Refilling works by removing all the line-breaks, then inserting new ones where necessary. The command `M-s' (`center-line') centers the current line within the current fill column. With an argument, it centers several lines individually and moves past them. To refill many paragraphs, use `M-x fill-region', which divides the region into paragraphs and fills each of them. `M-q' and `fill-region' use the same criteria as `M-h' for finding paragraph boundaries (*note Paragraphs::.). For more control, you can use `M-x fill-region-as-paragraph', which refills everything between point and mark. This command deletes any blank lines within the region, so separate blocks of text end up combined into one block. A numeric argument to `M-q' causes it to "justify" the text as well as filling it. This means that extra spaces are inserted to make the right margin line up exactly at the fill column. To remove the extra spaces, use `M-q' with no argument. (Likewise for `fill-region'.) When `adaptive-fill-mode' is non-`nil' (which is normally the case), if you use `fill-region-as-paragraph' on an indented paragraph and you don't have a fill prefix, it uses the indentation of the second line of the paragraph as the fill prefix. The effect of adaptive filling is not noticeable in Text mode, because an indented line counts as a paragraph starter and thus each line of an indented paragraph is considered a paragraph of its own. But you do notice the effect in Indented Text mode and some other major modes. The maximum line width for filling is in the variable `fill-column'. Altering the value of `fill-column' makes it local to the current buffer; until that time, the default value is in effect. The default is initially 70. *Note Locals::. The easiest way to set `fill-column' is to use the command `C-x f' (`set-fill-column'). With no argument, it sets `fill-column' to the current horizontal position of point. With a numeric argument, it uses that as the new fill column.