# DIST: This is the distribution Makefile for Emacs.  configure can
# DIST: make most of the changes to this file you might want, so try
# DIST: that first.

# add -DUSG for SysV movemail and timer
# For Xenix, add the following for movemail:
#  LOADLIBES= -lx
# For Mips, the following is needed for who knows what.
#  LOADLIBES = -lmld /usr/bsd43/usr/lib/libc.a

# Avoid trouble on systems where the `SHELL' variable might be
# inherited from the environment.
SHELL = /bin/sh

# ==================== Things `configure' will edit ====================

CC=@CC@
CFLAGS=@CFLAGS@
ALLOCA=@ALLOCA@
C_SWITCH_SYSTEM=@c_switch_system@
LD = link
LDFLAGS=
LOADLIBES=@libsrc_libs@
YACC=@YACC@
version=@version@
version_us=@version_us@
configname=@configuration@
sys_includes=@sys_includes@

# ==================== Where To Install Things ====================

# The default location for installation.  Everything is placed in
# subdirectories of this directory.  The default values for many of
# the variables below are expressed in terms of this one, so you may
# not need to change them.  This is set with the --prefix option to
# `../configure'.
prefix_dev=@prefix_dev@
prefix_dir=@prefix_dir@
prefix=@prefix@

# Like `prefix', but used for architecture-specific files.  This is
# set with the --exec-prefix option to `../configure'.
exec_prefix_dev=@exec_prefix_dev@
exec_prefix_dir=@exec_prefix_dir@
exec_prefix=@exec_prefix@

# Where to install Emacs and other binaries that people will want to
# run directly (like etags).  This is set with the --bindir option
# to `../configure'.
bindir_dev=@bindir_dev@
bindir_dir=@bindir_dir@
bindir=@bindir@

# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
# data.  ${archlibdir} is usually below this.  This is set with the
# --libdir option to `../configure'.
libdir_dev=@libdir_dev@
libdir_dir=@libdir_dir@
libdir=@libdir@

# Where to find the source code.  This is set by the configure
# script's `--srcdir' option.  However, the value of ${srcdir} in
# this makefile is not identical to what was specified with --srcdir,
# since the variable here has `/lib-src' added at the end.
srcdir_dev=@srcdir_dev@
srcdir_dir=@srcdir_dir@
srcdir=@srcdir@
VPATH=@srcdir@

# Where to find some usefull VMS scripts
vmssrcdir=$(srcdir_dev)[$(srcdir_dir).-.vms]

# ==================== Emacs-specific directories ====================

# These variables hold the values Emacs will actually use.  They are
# based on the values of the standard Make variables above.

# Where to put executables to be run by Emacs rather than the user.
# This path usually includes the Emacs version and configuration name,
# so that multiple configurations for multiple versions of Emacs may
# be installed at once.  This can be set with the --archlibdir option
# to `../configure'.
archlibdir=@archlibdir@

# ==================== Utility Programs for the Build ====================

# ../configure figures out the correct values for these.
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

# ============================= Targets ==============================
# Things that a user might actually run, which should be installed in bindir.
# removed: emacsclient.exe, ctags.exe, 
INSTALLABLES = etags.exe,b2m.exe
# removed: emacsclient.exe.*, 
!INSTALLABLES_D = etags.exe;*, ctags.exe;*, b2m.exe
INSTALLABLE_SCRIPTS = 

# Things that Emacs runs internally, or during the build process,
# which should not be installed in bindir.
# removed: movemail.exe, cvtmail.exe, fakemail.exe, emacsserver.exe, timer.exe
UTILITIES= test-distrib.exe,wakeup.exe,make-docfile.exe,digest-doc.exe,\
sorted-doc.exe,yow.exe,env.exe,hexl.exe,vmssendmail.exe,vmsgetmail.exe
# removed: movemail.exe.*, cvtmail.exe.*, fakemail.exe.*, emacsserver.exe.*,
#	timer.exe.* 
!UTILITIES_D= test-distrib.exe.*, wakeup.exe.*, make-docfile.exe.*, \
!	digest-doc.exe.*, sorted-doc.exe.*, \
!	yow.exe.*, env.exe.*, hexl.exe.*, vmssendmail.exe.*


# Like UTILITIES, but they're not system-dependent, and should not be
# deleted by the distclean target.
SCRIPTS= 

EXECUTABLES= $(UTILITIES), $(INSTALLABLES)

SOURCES = COPYING ChangeLog Makefile.in README aixcc.lex emacs.csh \
	makedoc.com *.c *.h *.y rcs2log vcdiff

### We need to #define emacs to get the right versions of some files.
### Some other files - those shared with other GNU utilities - need
### HAVE_CONFIG_H #defined before they know they can take advantage of
### the information in [-.src]config.h.
ALL_CFLAGS = $(C_SWITCH_SYSTEM) /define=("emacs"="","HAVE_CONFIG_H"="" \
'extra_defs') /include=(sys$disk:[],sys$disk:[-.src],$(srcdir),\
$(srcdir_dev)[$(srcdir_dir).-.src] 'extra_incl') $(CFLAGS)
CPP_CFLAGS = $(C_SWITCH_SYSTEM) /define=("emacs"="","HAVE_CONFIG_H"="" \
'extra_defs') /include=(sys$disk:[],sys$disk:[-.src],$(srcdir),\
$(srcdir_dev)[$(srcdir_dir).-.src]'extra_incl') $(CPPFLAGS) $(CFLAGS)

.FIRST :
	if "$(sys_includes)" .nes. "" then -
		define /nolog sys $(sys_includes),sys$disk:[]
	if "$(sys_includes)" .eqs. "" then -
		define /nolog sys sys$disk:[]
	@ extra_defs = ""
	@ extra_incl = ""

# This is the default compilation command.
# But we should never rely on it, because some make version
# failed to find it for getopt.o.  Using an explicit command made it work.
.obj.exe :
	$(LD) $(LDFLAGS) $*.OBJ,[-.vms]vmslink.opt/opt

.c.exe :
	$(CC) $(CPP_CFLAGS) $< /obj = $*.obj
	$(LD) $(LDFLAGS) /exec=$*.exe $*.OBJ,[-.vms]vmslink.opt/opt
	delete $*.obj.*

# This is a copy of the default MMS built-in rule, if someone made
# the mistake of removing it (by making the logical MMS$RULES point
# at a file without this rule)
.c.obj :
	$(CC) $(CPP_CFLAGS) $(MMS$SOURCE) /obj=$(MMS$TARGET)

all : $(UTILITIES) $(INSTALLABLES)
	@ !

### Install the internal utilities.  Until they are installed, we can
### just run them directly from lib-src.
$(archlibdir) : all
	@ write sys$output ""
	@ write sys$output "Installing utilities run internally by Emacs."
	create/dir $(archlibdir)
	@$(vmssrcdir)compare_dirs $(archlibdir) 'f$environment("DEFAULT")' result
	if .not. result then $(INSTALL_PROGRAM) $(UTILITIES) $(archlibdir)
	- purge $(archlibdir)$(UTILITIES)

# We don't need to install `wakeup' explicitly, because it will be copied when
# this whole directory is copied.
# We use .n, not .new as before, to avoid exceeding the 14-character limit.
install : $(archlibdir)
	@ write sys$output ""
	@ write sys$output "Installing utilities for users to run."
	$(INSTALL_PROGRAM) $(INSTALLABLES) $(bindir)
	- purge $(bindir)$(INSTALLABLES) ! This is bound to work...

uninstall :
	a = f$environment("DEFAULT")
	set def $(bindir)
	- @$(vmssrcdir)delete $(INSTALLABLES)
	set def $(archlibdir)
	- @$(vmssrcdir)delete $(UTILITIES),$(INSTALLABLES)
	set def 'a'

mostlyclean :
	- @$(vmssrcdir)delete *.obj

clean : mostlyclean
	- @$(vmssrcdir)delete $(INSTALLABLES),$(UTILITIES)

distclean : clean
	- @$(vmssrcdir)delete [-.etc]DOC*.*,[]*_tab.c,*_tab.h,TAGS.*

realclean : distclean
	@ !

extraclean : realclean
	- @$(vmssrcdir)delete _$*.*$
	- purge

unlock :
	set file/prot=(o:rwd) $(SOURCES)

relock :
	set file/prot=(o:r) $(SOURCES)

# Test the contents of the directory.
check :
	@ write sys$output "We don't have any tests for GNU Emacs yet."

TAGS : etags.exe
	mcr sys$disk:[]etags *.c *.h

# This verifies that the non-ASCII characters in the file `testfile'
# have not been clobbered by whatever means were used to copy and
# distribute Emacs.  If they were clobbered, all the .elc files were
# clobbered too.
test-distrib.exe : $(srcdir)test-distrib.c [-.vms]vmslink.opt
!	$(CC) $(CFLAGS) /obj=test-distrib.obj $(srcdir)test-distrib.c
!	$(LD) $(LDFLAGS) /exe=test-distrib.exe test-distrib.obj,[-.vms]vmslink.opt/opt

test-distrib : test-distrib.exe
	mcr sys$disk:[]test-distrib $(srcdir)testfile

alloca.obj : $(srcdir)alloca.c
	@ extra_defs=",""BLOCK_INPUT""="""",""UNBLOCK_INPUT""="""""
	$(CC) $(CPP_CFLAGS) $(srcdir)alloca.c /obj=alloca.obj
	@ extra_defs = ""

GETOPTOBJS = getopt.obj, getopt1.obj $(ALLOCA)
GETOPTDEPS = $(GETOPTOBJS) $(srcdir)getopt.h
getopt.obj : $(srcdir)getopt.c $(srcdir)getopt.h
!	$(CC) $(CPP_CFLAGS) $(srcdir)getopt.c /obj=getopt.obj
getopt1.obj : $(srcdir)getopt1.c $(srcdir)getopt.h
!	$(CC) $(CPP_CFLAGS) $(srcdir)getopt1.c /obj=getopt1.obj
!etags-vmslib.obj : $(srcdir)etags-vmslib.c
!	$(CC) $(CPP_CFLAGS) $(srcdir)etags-vmslib.c /obj=etags-vmslib.obj
!hackargv.obj : $(srcdir)hackargv.c
!	$(CC) $(CPP_CFLAGS) $(srcdir)hackargv.c /obj=hackargv.obj

etags.exe : $(srcdir)etags.c $(GETOPTDEPS) [-.vms]vmslib.olb \
		[-.src]config.h [-.vms]vmslink.opt
	@ extra_defs=",""ETAGS""="""",""USE_HACKARGV""="""""
	$(CC) $(CPP_CFLAGS) $(srcdir)etags.c /obj=etags.obj
	@ extra_defs = ""
	link /exe=etags.exe etags.obj,$(GETOPTOBJS), \
		[-.vms]vmslib.olb/lib,[-.vms]vmslink.opt/opt

wakeup.exe : $(srcdir)wakeup.c [-.vms]vmslink.opt
!	$(CC) $(CPP_CFLAGS) $(srcdir)wakeup.c /obj=wakeup.obj
!	$(LD)/exe=wakeup.exe wakeup.obj,[-.vms]vmslink.opt/opt

make-docfile.exe : $(srcdir)make-docfile.c [-.vms]vmslink.opt
!	$(CC) $(CPP_CFLAGS) $(srcdir)make-docfile.c /obj=make-docfile.obj
!	$(LD)/exe=make-docfile.exe make-docfile.obj,[-.vms]vmslink.opt/opt

digest-doc.exe : $(srcdir)digest-doc.c [-.vms]vmslink.opt
!	$(CC) $(CPP_CFLAGS) $(srcdir)digest-doc.c /obj=digest-doc.obj
!	$(LD)/exe=digest-doc.exe digest-doc.obj,[-.vms]vmslink.opt/opt

SORTED_DOC_OBJS=sorted-doc.obj qsort.obj $(ALLOCA)
qsort.obj : $(srcdir)qsort.c
sorted-doc.obj : $(srcdir)sorted-doc.c
sorted-doc.exe : $(SORTED_DOC_OBJS) [-.vms]vmslink.opt
	$(LD)/exe=sorted-doc.exe sorted-doc.obj,qsort.obj$(ALLOCA),[-.vms]vmslink.opt/opt

b2m.obj : $(srcdir)b2m.c [-.src]config.h
	@ extra_incl = ",$(srcdir_dev)[$(srcdir_dir).-.src]"
	$(CC) $(CPP_CFLAGS) $(srcdir)b2m.c /obj=b2m.obj
	@ extra_incl = ""

b2m.exe : b2m.obj [-.vms]vmslink.opt

movemail.exe : $(srcdir)movemail.c [-.src]config.h [-.vms]vmslink.opt
	@ extra_incl = ",$(srcdir_dev)[$(srcdir_dir).-.src]"
	$(CC) $(CPP_CFLAGS) $(srcdir)movemail.c /obj=movemail.obj
	@ extra_incl = ""
	$(LD)/exe=movemail.exe movemail.obj,[-.vms]vmslink.opt/opt

cvtmail.exe : $(srcdir)cvtmail.c [-.vms]vmslink.opt
!	$(CC) $(CPP_CFLAGS) $(srcdir)cvtmail.c /obj=cvtmail.obj
!	$(LD)/exe=cvtmail.exe cvtmail.obj,[-.vms]vmslink.opt/opt

fakemail.exe : $(srcdir)fakemail.c [-.src]config.h [-.vms]vmslink.opt
	@ extra_incl = ",$(srcdir_dev)[$(srcdir_dir).-.src]"
	$(CC) $(CPP_CFLAGS) $(srcdir)fakemail.c /obj=fakemail.obj
	@ extra_incl = ""
	$(LD)/exe=fakemail.exe fakemail.obj,[-.vms]vmslink.opt/opt

vmssendmail.exe : $(srcdir)vmssendmail.c [-.vms]vmslink.opt


vmsgetmail.obj : $(srcdir)vmsgetmail.c $(srcdir)mailmsgdef.h
vmsgetmail.exe : vmsgetmail.obj $(GETOPTOBJS) [-.vms]vmslink.opt
	link /exe=vmsgetmail.exe vmsgetmail.obj,$(GETOPTOBJS),\
		[-.vms]vmslink.opt/opt

yow.exe : $(srcdir)yow.c [-.src]paths.h [-.vms]vmslink.opt
!	$(CC) $(CPP_CFLAGS) $(srcdir)yow.c /obj=yow.obj
!	$(LD)/exe=yow.exe yow.obj,[-.vms]vmslink.opt/opt

env.exe : $(srcdir)env.c [-.src]config.h [-.vms]vmslink.opt
	@ extra_incl = ",$(srcdir_dev)[$(srcdir_dir).-.src]"
	@ extra_defs = ",""EMACS""="""""
	$(CC) $(CPP_CFLAGS) $(srcdir)env.c /obj=env.obj
	@ extra_defs = ""
	@ extra_incl = ""
	$(LD)/exe=env.exe env.obj,[-.vms]vmslink.opt/opt

emacsserver.exe : $(srcdir)emacsserver.c [-.src]config.h [-.vms]vmslink.opt
	@ extra_incl = ",$(srcdir_dev)[$(srcdir_dir).-.src]"
	$(CC) $(CPP_CFLAGS) $(srcdir)emacsserver.c /obj=emacsserver.obj
	@ extra_incl = ""
	$(LD)/exe=emacsserver.exe emacsserver.obj,[-.vms]vmslink.opt/opt

emacsclient.exe : $(srcdir)emacsclient.c [-.src]config.h [-.vms]vmslink.opt
	@ extra_incl = ",$(srcdir_dev)[$(srcdir_dir).-.src]"
	$(CC) $(CPP_CFLAGS) $(srcdir)emacsclient.c /obj=emacsclient.obj
	@ extra_incl = ""
	$(LD)/exe=emacsclient.exe emacsclient.obj,[-.vms]vmslink.opt/opt

hexl.exe : $(srcdir)hexl.c [-.vms]vmslink.opt
!	$(CC) $(CPP_CFLAGS) $(srcdir)hexl.c /obj=hexl.obj
!	$(LD)/exe=hexl.exe hexl.obj,[-.vms]vmslink.opt/opt

TIMEROBJS=getdate.obj, timer.obj $(ALLOCA)
getdate.obj : $(srcdir)getdate.y [-.src]config.h
	$(YACC) $(YFLAGS) $(srcdir)getdate.y
	@ extra_incl = ",$(srcdir_dev)[$(srcdir_dir).-.src]"
	$(CC)  $(CPP_CFLAGS) y_tab.c
	@ extra_incl = ""
	rename y_tab.obj getdate.obj
timer.obj : $(srcdir)timer.c [-.src]config.h
	@ extra_incl = ",$(srcdir_dev)[$(srcdir_dir).-.src]"
	$(CC) $(CPP_CFLAGS) $(srcdir)timer.c
	@ extra_incl = ""
timer.exe : $(TIMEROBJS) [-.vms]vmslink.opt
	@ extra_incl = ",$(srcdir_dev)[$(srcdir_dir).-.src]"
	$(LD)/exe=timer.exe $(TIMEROBJS),[-.vms]vmslink.opt/opt
	@ extra_incl = ""

#make-path.exe : $(srcdir)make-path.c [-.src]config.h [-.vms]vmslink.opt
#	@ extra_incl = ",$(srcdir_dev)[$(srcdir_dir).-.src]"
#	$(CC) $(CPP_CFLAGS) $(srcdir)make-path.c /obj=make-path.obj
#	$(LD)/exe=make-path.exe make-path.obj,[-.vms]vmslink.opt/opt
#	@ extra_incl = ""