.TITLE		TESTDEV IO Access Characterization Utility Messages
.IDENT		'Version 2.1'
.FACILITY	TSTDVC,24/PREFIX=TDV_

.SEVERITY	FATAL
DEVBUG	<unable to retrieve device !AS information>/FAO=1
DISMNT	<unable to process - device !AS not currently mounted>/FAO=1
NEGSEEK	<seek range must be positive integer or null for entire volume>
NILBLCK	<IO block size must be positive integer no more than VMS limit>
NILIO	<IO collection size must be positive integer no more than !UL>/FAO=1
NILSTRM	<IO stream count must be positive integer no more than !UL>/FAO=1
NODISK	<unsupported device type - !AS is not a disk>/FAO=1
NOLINK	<unable to open channel to device !AS>/FAO=1
NOPRIV	<insufficient IO privileges for operation - check documentation>
REVLBN	<illogical seek range - low/high LBN boundaries are reversed>
SEEKBLK	<seek range insufficient to accomodate IO block size>

.SEVERITY	ERROR
IOBUG	<stream !UL unable to start upon status !UL at LBN !UL>/FAO=3
        
.SEVERITY	WARNING
COLLSIZ	<ratio of collection size to seek range is relatively small>
IOLSTRM	<too few IO's to operate all streams - reducing streams>
MEG2LBN	<impossibly large megabyte ranging - maximizing upper boundary>
STRMDIS	<stream !UL discarded upon status !UL at LBNs !UL:!UL>/FAO=4
XCRANGE	<seek upper LBN boundary exceeds device size - will maximize>
ZEROLOW	<seek lower LBN boundary cannot be negative - will be zeroed>
        
.SEVERITY	INFORMATION
START	<Started testing device !AS (label !AS) at !%D>/FAO=3
STOP	<TestDev !AS on !AS completed testing at !%D>/FAO=3
DEVID	<Device Information!/  Type:!#* !AS!8* (serial !UL)!/  Host:!#* !AS!/  Capacity:!19UL block!%S (!UL megabyte!%S)>/FAO=7
TESTID  <Test Conditions!/  Coverage:!#* !AS!/  Threading:!18UL stream!%S!/  IO size:!20UL block!%S>/FAO=4
TESTID2	<  Seek range:!17UL block!%S (of !UL specified maximum)!/  Operations:!17UL read!%S  (of !UL specified : !UL dropped)>/FAO=5
PERFID	<Performance Information!/  Elapsed time:    !11%T!/  Throughput:!17UL byte/sec!/  IO rate:!18UL.!UL IO/sec>/FAO=4
PERFID2	<  IO duration:!14UL.!UL msec   (average)!/  IO spread:!16UL.!UL msec   (standard deviation)>/FAO=4

.END