Network Utilities Quick Reference Card

______________________________________________________________________________

ETHERWATCH		X4-002

	spy	[/device=<ddcu:>]				See Note 1
		[/from={<ethernet_addr>|<node_name>|UNKNOWN}]	*
		[/to={<ethernet_addr>|<node_name>|UNKNOWN}]	*
		[/protocol=<protocol>]				*
		[/display=<display_option>]		       ALL, See Note 3
		[/both]

______________________________________________________________________________

FRAME_COUNTER		X1-008

 framecount	[/device=<ddcu:>]				See Notes 1,2
		[/address=<ethernet_addr>]			*
		[/protocol=<protocol>]				*

______________________________________________________________________________

LATWATCH		X4-004

   latwatch	[/device=<ddcu:>]				See Note 1
		[/from={<ethernet_addr>|<node_name>|UNKNOWN}]	*
		[/to={<ethernet_addr>|<node_name>|UNKNOWN}]	*
		[/both]
		[/message_type=<number>]

	message types:
	 0 run message		 1 start message	 2 stop message
	10 service info		12 command message	13 status message
	14 solicit info		15 response info
	16 <unknown types>	63 <match all types>
______________________________________________________________________________

PROTOCOL_COUNTER	X1-006

   ptycount	[/device=<ddcu:>]				See Notes 1,2
		[/address=<ethernet_addr>]			*

______________________________________________________________________________

Note 1:	The default is established at run-time by using the first ethernet
	device found on the system.

Note 2:	This utility will collect data until interrupted by a Control/C.
	At this stage, the data will be displayed and you then have the
	option of continuing, resetting the counters and continuing, or
	exiting.

Note 3: <display_option> = { ALL | NONE | HEXADECIMAL | TEXT }
______________________________________________________________________________
								   dbs-93287-1